Chapter 2 System Components Click the lock icon to take control of the camera. When you have control of the camera, the Modify button will appear beneath the camera settings. Click the Modify button to adjust camera settings. 2-46 HAWK MV-4000 Smart Camera Guide Important: you will need for the came Note addr AA. the d Clas sam To a ente nam cam – HA Important: you will need for the came When modifying camera settings, to enter a username and password ra if a password has been defined. Note addr AA. the d Clas sam To a ente nam cam – HA : The HAWK MV-4000’s default IP ess is: 192.168.AA.BB where BB are the last 2 octets in decimal of evice MAC Address with subnet s B 255.255.0.0.
Set your PC to the e subnet (192.168.0.1, for example). ccess the camera’s “health status”, r the address http://[your camera e]:8088 in a browser, where [your era name] is the name of the device WK3204E8, for example. Modify camera settings in the Details area at the left of the Connect view. Create, Load, or Upload a job using the buttons in the center of the Connect view.