Appendix C General Specifications HAWK MV-4000 Connectors The HAWK MV-4000 has several interface connectors. These are the digital I/O and power connector, 100/1000 Base-T connector, the VGA/USB connector, and the liquid lens connector. Digital I/O and Power Adapter Cable Connector The digital I/O and power connector of the adapter cable is an M12 12-pin plug connector that transmits and receives digital I/O signals, provides an analog reference voltage for an inline control system lighting controller, and provides power to your HAWK MV-4000. C-8 HAWK MV-4000 Smart Camera Guide