C HAWK MV-4000 General Specifications VGA/USB Connector General Specifications The VGA/USB connector is an M12 12-pin plug connector that transmits output video and can both transmit and receive USB signals. The output video signal is a standard RGB analog video output used to send the operating system’s desktop to the connected display device. The video output can be used to display the desktop. The table below summarizes the supported standard display resolutions: The pinout for the VGA/USB connector is as follows:
HAWK MV-4000 Smart Camera Guide C-11 Standard Display Resolution Analog Video Maximum Refresh Rate 1920 x 1200 RGB 60 Hz 1920 x 1080 RGB 60 Hz 1600 x 1200 RGB 60 Hz 1280 x 1024 RGB 85 Hz 1024 x 768 RGB 85 Hz 800 x 600 RGB 85 Hz 640 x 480 RGB 85 Hz Pin Signal Name Description 1 USB PWR 5 V supplied from your HAWK MV-4000 to USB peripherals.
2 USB DATA P _ _ USB data + 3 USB DATA N _ _ USB data – 4 USB REF _ USB reference 5 RED VID OUT _ _ R component of the RGB video output signal 6 BLUE VID OUT _ _ B component of the RGB video output signal 7 VSYNC Vertical sync of the RGB video output signal 8 HSYNCH Horizontal sync of the RGB video output signal 9 GREEN VID OUT _ _ G component of the RGB video output signal 10 VGA REF _ VGA reference 11 VGA REF _ VGA reference 12 VGA REF _ VGA reference