omron — MVMonitor Web Page

D Using the MVMonitor Web Page MVMonitor Web Page Top Bar The area at the top of the page displays the following: • Name of the camera. • State: This shows the state of the runtime. If it is up and running, it will show the time and date of when it was launched. If it is not running, it will display an error message. • Job: This shows the name of the .avp job file that is currently loaded (if any), and will show whether the .avp is running or stopped. Device Info Area This grid is intended to provide the following basic information about the camera: • Runtime Version: The version number of the installed machine vision runtime firmware. • MAC address of the camera.

• Serial Number of the camera. • IP Address of the camera. • Subnet of the camera. • DHCP: Indicates whether DHCP is on or off. • Licenses: Lists the licenses that are currently loaded on the camera. • Logs Count: Gives a count of the number of log files that have been created in the \VscapeRuntime\Logs folder. • "Access Log Files" Link: Clicking this link will take you to an FTP page where you can download any of the log files to your local PC. Launch Omron Microscan Clicking Launch CloudLink opens the HAWK MV-4000 Smart Camera’s web-based runtime monitoring interface in a separate browser tab. More information about CloudLink can be found in Appendix E: CloudLink Web HMI .

Job Info Area • Name: Name of the currently loaded job. • Last Saved Date: Date and time when the job was last saved. • Downloaded From: Name of the host from which the job was downloaded. • Download Dir: Name of the directory on the host from which the job was downloaded. Refreshing the Page The data displayed when you first see the MVMonitor page is only what has been captured at the time the page is loaded. The page does not self-refresh automatically, so if the job changes, or the state of the device changes, that new information will not be reflected on the MVMonitor web page unless you manually refresh it. HAWK MV-4000 Smart Camera Guide D-3