Command system EN 3.5.3 SOURce :BURSt:NPeriods Command format SOURce :BURSt:NPeriods |MINimum|MAXimum SOURce :BURSt:NPeriods? [MINimum|MAXimum] Function description Set the number of output period for a burst (multi-period burst mode only). Argument Instructions None Return format Returns the current period number. Example SOURce1:BURSt:NPeriods 5 /* Set the number of burst periods for channel 1 to 5*/ 3.5.4 SOURce :BURSt Command format SOURce :BURSt ON|OFF SOURce :BURSt? Function description Enable or disable burst mode. Argument Instructions ⚫ With burst enabled, the output phase is set to 0.
⚫ To avoid numerous waveform changes, wait until you have configured other burst arguments before enabling burst mode. HDG300C Programming manual Copyright © Qingdao Hantek Electronics Co., LTD 18 Name Range Default value 1 to 1 000 000 (external or manual triggered) 1 1 to 500 000 (internal trigger) Name Range Default value BURSt ON|OFF OFF