Command system EN SOURce :MOD:3FSKey:INTernal:RATE? [MINimum|MAXimum] SOURce :MOD:4FSKey:INTernal:RATE |MINimum|MAXimum SOURce :MOD:4FSKey:INTernal:RATE? [MINimum|MAXimum] Function description Set the rate at which the output frequency "moves" between the carrier frequency and the jump frequency. Argument Instructions FSK rates are only for internal sources (FSK:SOURce INTernal). Return format Return the rate value as a scientific count.
Example SOURce1:MOD:FSKey:INTernal:RATE 200 /* set the modulation rate for channel 1 FSK modulation to 200Hz */ SOURce1:MOD:4FSKey:INTernal:RATE 500 /* set the modulation rate for channel 1 4FSK modulation to 500Hz */ 3.13 The FUNCtion subsystem 3.13.1 SOURce :FUNCtion Command format SOURce :FUNCtion SOURce :FUNCtion? Function description Select the output function type. Argument HDG300C Programming manual Copyright © Qingdao Hantek Electronics Co., LTD 34 Name Range Default value RATE 2 mHz to 1 MHz 100Hz Name Range Default value FUNCtion SINusoid|SQUare|RAMP| SINusoid PULSe|NOISe|DC|SINC|EXPFall|HAVErsine|LOREnt z| DUALtone|GAUSe| ECG| USER| HARMonic|