Command system EN EDOSC","DISCHARGE","DUALTONE","GAMMA","GATEVIBR","LFMPULSE","MCNOI SE","PAHCUR","QUAKE","RADAR","RIPPLE","ROUNDHALF","ROUNDPM","STEPRE SP","SWINGOSC","TV","VOICE","ISO16750_2SP","ISO16750_2VR","ISO7637_2TP1" ,"ISO7637_2TP2A","ISO7637_2TP2B","ISO7637_2TP3A","ISO7637_2TP3B","ISO763 7_2TP4","ISO7637_2TP5A","ISO7637_2TP5B","LOGINTION","SCR","SURGE","COSH ","COSINT","COT","COTHCON","COTHPRO","CSCCON","CSCHCON","CSCHPRO"," CSCPRO","RECIPCON","RECIPPRO","SECCON","SECH","SECPRO","SINH","SININT ","SINC","SQRT","TAN","TANH","BARLETT","BARTHANNWIN","BLACKMAN","BOHM ANWIN","BOXCAR","CHEBWIN","FLATTOPWIN","HAMMING","HANNING","KAISER"," MUTTALLWIN","PARZENWIN","TAYLORWIN","TRIANG","TUKEYWIN","BLACKMANH" ,"A1","A1H","B1","C1","C1H","D1","D1H","E1","F1","F1H","G1","G1H" 。 Return format None Example SOURce1:FUNCtion:ARBitrary "INT:/Builtin/SINC.hwf" /* Set the arbitrary wave output file of channel 1 to INT:/Builtin/ sinc.hwf */ SOURce :FUNCtion:ARBitrary?
/* Return Int:/Builtin/ sinc.hwf if succeeding */ 3.13.3 SOURce :FUNCtion:ARBitrary:PTPeak Command format SOURce :FUNCtion:ARBitrary:PTPeak |MINimum|MAXimum, SOURce :FUNCtion:ARBitrary:PTPeak?{MINimum|MAXimum} Function description Set the dual peak voltage for an arbitrary wave. Argument Instructions None Return format Return as a scientific count. Example SOURce1:FUNCtion:ARBitrary:PTPeak 4 /* Set channel 1 peak-to-peak voltage HDG300C Programming manual Copyright © Qingdao Hantek Electronics Co., LTD 36 Name Range Default value PTPeak 1,4,5,20 discrete values 1V