Command system EN Example SOURce1:SWEep ON /* Turn on Channel 1 sweep function */ 3.25.4 SOURce :SWEep:TIME Command format SOURce :SWEep:TIME |MINimum|MAXimum SOURce :SWEep:TIME? [MINimum|MAXimum] Function description Set the time (in seconds) for the scan to go from the start frequency to the stop frequency. Argument Instructions None Return format Return the time value +5.000000000000000E+00 as a scientific count. Example SOURce1:SWEep:TIME 5 /* Set the sweep time for channel 1 to 5s */ 3.25.5 SOURce :FREQuency:STARt Command format SOURce :FREQuency:STARt |MINimum|MAXimum SOURce :FREQuency:STARt? [MINimum|MAXimum] Function description Set the start frequency of the sweep.
Argument Copyright © Qingdao Hantek Electronics Co., LTD HDG300C Programming manual 61 Name Range Default value 1 ms to 300 s 1s Default Name Range value Different sweep waveforms correspond to different start 100Hz frequency ranges. Refer to the user manual for details. Name Range Default value Different sweep waveforms correspond to different start 100Hz frequency ranges. Refer to the user manual for details.