Hantek — 14.1 Install Keysight IO libraries suite

Remote Control EN 14 Remote Control The HDG3000C can be controlled remotely through the following two methods. Use PC software Users can use the PC software to send commands to remotely control the instrument. You can download the software from our official website. User-defined programming Users can program and control the instrument by using the SCPI (Standard Commands for Programmable Instruments) commands. For more information about the commands and programming, refer to the SCPI protocol manual. HDG3000C can communicate with PC through USB. This chapter will give a detailed introduction of how to use software to control HDG3000C remotely through the real USB port.

⚫ Install Keysight IO libraries suite ⚫ Remote Control via USB 14.1 Install Keysight IO libraries suite Users can download the application software package on the official website of Hantek: http://hantek.com/products/detail/17187 Or click the following website to download latest one : http://www.keysight.com/main/software.jspx?ckey=2175637&id=2175637&nid=-111 43.0.00&lc=eng&cc=GB Double click the icon to start installing. Click ‘Next’ to continue. Copyright © Qingdao Hantek Electronics Co., LTD HDG3000C User manual 77