Quick Guide Setting steps: 1. Select the output channel Press the digital channel button on the front panel, or continuously press the left " ◁ " and right " ▷ " arrows to select the output channel to be set. 2. Set voltage/current: Press the arrow keys to select voltage or current, use the numeric keyboard or knob to set the value, press "Ч" to delete, and press "Enter" to confirm and exit editing. 3. Turn on the output Press the "On/Off" key to turn on the output. 2. Series output Press Output Settings->Operation Mode to select Series, which can be set as serial output. In series mode, the channels are internally connected in series to form a single output.
The channel 2 window of the main interface displays "SERIES with CH1". Channel 1 is the master and channel 2 is the slave. The "+" terminal of channel 1 and the "-" terminal of channel 2 are the two output terminals of the series circuit. The output voltage is twice the set voltage of channel 1, and the output current is the set current of channel 1. The external wiring method of series mode is as follows: 15