Quick Guide 5.1.3 Power-on setting Press "Power On Setting" to select a state to be automatically recalled after power-on. You can choose the default settings or user-specified settings. Press "SetPwrOn" to save the settings. Users can also check " □ Set this as power-on state." in "Store Settings" to set. 5.1.4 Restore default settings Press "Set to Defaults" to restore the default settings. 5.2 Setup 5.2.1 Help language The default is English, press “Enter” to switch to Chinese. 5.2.2 Sound switch Press “Enter” to switch the key tone on or off. 5.2.3 Firmware upgrade Select the channel to be upgraded and press “Start” to start the upgrade.
5.2.4 Calibration The instrument has been calibrated before leaving the factory, and the user does not need to calibrate again. If you really need to calibrate, you can use SCPI commands to recall the calibration program. 5.3 Error message Error displays the error information of the instrument. The error information list is arranged in the order in which it was generated, that is, the most recent error is displayed at the top. Press "Next" to view the next page. 5.4 Capture Capture can set the properties of the screenshot file, including the save path and file name. The default picture format is .bmp.
Long press the "Meter View" button for 3 seconds to perform the screenshot operation, and the screenshot file is automatically saved to the external storage device. 24