OUTP:DEL:RISE? (@1) /*Return 5.5*/ Delay to Close the Channel ： OUTPut:DELay: FALL Command format OUTPut:DELay:FALL OUTPut:DELay:FALL? Function description Set or query the channel delay closing time. Parameter time: Channel delay closing time ， unit: s, Floating point. ch: Refer to the OUTP command. Description When the channel is closed, the channel will be closed after the set time. Return value The query returns the delayed closing time of the channel ， unit: s. For example OUTPut:DELay:FALL 5.5,(@1) /* Set channel 1 to delay 5.5s to close */ OUTPut:DELay:FALL? (@1) /*Return 5.5s */ Channel Coupling Switch ： OUTPut:COUPle Command format OUTPut:COUPle OUTPut:COUPle?
Function description Set or query the channel coupling switch status. Parameter sw: OFF | ON | 0 | 1. ch: Refer to the OUTP command. Description ON: Turn on channel coupling. OFF: Turn off channel coupling. Return value The query returns ON or OFF. For example OUTPut:COUPle ON,(@1) /* Turn on the channel 1 coupling switch */ OUTPut:COUPle? (@1) /*Return ON*/ Input Suppression Type ： OUTPut:INHibit:MODE Command format OUTPut:INHibit:MODE OUTPut:INHibit:MODE? 5