Hengstler AC58 DeviceNet Absolute Rotary Encoder (EN)

email: sales@impulseautomation.co.uk web: www.impulseautomation.co.uk TECHNICAL DATASHEET Absolute Encoder AC 58 - DeviceNet n Programmable: Resolution, Preset, Direction n Allan-Bradley compatible n Scalable n Preset function n Diagnostic LED n Option: Display "tico" Synchro flange TECHNICAL DATA mechanical 1 at 20°C TECHNICAL DATA electrical Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

Housing diameter 58 mm Shaft diameter 6 mm / 10 mm (Solid shaft) 10 mm / 12 mm (Hub shaft) Flange (Mounting of housing) Synchro flange, Clamping flange, Tether, Square flange Protection class shaft input (EN 60529) IP64 or IP67 Protection class housing (EN 60529) IP67 Shaft load axial / radial 40 N / 60 N Axial endplay of mounting shaft (hubshaft) ± 1.5 mm Radial runout of mating shaft (hubshaft) ± 0.2 mm Max. speed max. 10 000 rpm (continuous), max. 12 000 rpm (short term) Starting torque typ. 1 ≤ 0.01 Nm Moment of inertia ca. 3.8 x 10 -6 kgm² Vibration resistance (DIN EN 60068-2-6) 100 m/s² (10 ...

500 Hz) Shock resistance (DIN EN 60068-2-27) 1000 m/s² (6 ms) Operating temperature -40 °C ... +85 °C Storage temperature -40 °C ... +85 °C Material shaft Stainless Steel Material housing Aluminum Weight approx. 350 g (ST) / 400 g (MT) Connection Bus cover with 2 sealed cable exits Bus cover with 2 sealed cable exits + 1 x M12 connector for "tico" display, 4 pole Bus cover with 1x M12 connectors (Conin), 5 pole General design as per DIN EN 61010-1, protection class III, contamination level 2, overvoltage class II Supply voltage DC 10-30 V Max.

current w/o load 220 mA (ST), 250 mA (MT) EMC Noise emission according to EN 50081-2 Immunity to interference according to EN 50082-2 Resolution singleturn 10 - 14 Bit Resolution multiturn 12 Bit Doc No: AE0007 Rev: 001 Impulse Automation Limited United Kingdom Company Registration 665193 Page 2009-12-15 12:07:08 1

Стр. 1

TECHNICAL DATASHEET Absolute Encoder AC 58 - DeviceNet TECHNICAL DATA electrical (continued) RECOMMENDED DATA TRANSFER Lead type A Transfer speeds STARTUP (the encoder can be easily and quickly installed and programmed with the EDS file) Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described.

Output code Binary Interface CAN High-Speed according to ISO/DIS 11898 CAN specification 2.0 A (11-Bit-Identifier) Linearity ± ½ LSB (± 1 LSB for resolution 13, 14, 25, 26 Bit) Profile/ protocol DeviceNet according to Rev. 2.0, progammable encoder Programmable Resolution, Preset, Direction Baud rate set via DIP switches to 125, 250, 500 KBaud Bus termination resistor set via DIP switches Updating of values every 5 Milliseconds MAC-ID set via DIP switches Shaft resistance 135...165 Ω (3...20MHz) Operating capacity Loop impedance Strand diameter > 0.64 mm Strand cross section > 0.34 mm 2 Segment length kbit/s 500 m 125 250 m 250 100 m 500 Doc No: AE0007 Rev:

001 Impulse Automation Limited United Kingdom Company Registration 665193 Page 2009-12-15 12:07:08 2

Стр. 2

TECHNICAL DATASHEET Absolute Encoder AC 58 - DeviceNet ELECTRICAL CONNECTIONS Bus cover with 2 sealed cable exits ELECTRICAL CONNECTIONS Bus cover with 1x M12, 5 pole Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. Terminals No. Signal name 1 UB in (DC 10 - 30V) 2 0 V in 3 CAN-L 4 CAN-H 5 DRAIN 6 DRAIN 7 DRAIN 8 CAN-L 9 0 V out 10 UB out (DC 10 - 30V) Pin Connector Colour 1 UB in (DC 10 - 30V) white 2 0 V in blue 3 CAN-L green/yellow 4 CAN-H black 5 DRAIN brown Doc No: AE0007 Rev:

001 Impulse Automation Limited United Kingdom Company Registration 665193 Page 2009-12-15 12:07:08 3

Стр. 3

Information shown in these data sheets are for guidance purposes only, no liability is accepted for any errors or omissions. The designer or user is solely responsible for the safe and proper use of these parts, assemblies or equipment described. TECHNICAL DATASHEET Absolute Encoder AC 58 - DeviceNet DIMENSIONED DRAWINGS Bus covers Connection "I" Connection "R" Connection "S" Bus covers Connection "I" Connection "R" Connection "S" Connection "T" Connection "Z" Dimensions in mm Doc No: AE0007 Rev: 001 Impulse Automation Limited United Kingdom Company Registration 665193 Page 2009-12-15 12:07:08 4

Стр. 4