Troubleshooting In the presence of unusual electromagnet phenomena, such as strong electro- magnetic fields or severe electrical disturbances, the system might behave strangely, or even stop working. In this case, turn off the system, wait until the electromagnetic environment has returned to normal and then turn it on again. The HP Designjet 3D Removal System has been designed to allow the end user to resolve most operating problems. When a problem is encountered, read through this troubleshooting section for possible solutions. Troubleshooting Non-Coded Error Conditions Table 3:
Non-Coded Error Conditions 19 Problem Recommendation Replacement Parts * Part most likely to resolve issue ** Part less likely to resolve issue No power Verify that the power cord is securely plugged in. * Main controller board ** Line filter ** Thermostat Verify that the power switch is in the ON position. Verify that AC power is present at the power outlet.