HP — Wavy surface

Wavy surface Characteristics: One side of the model will have wavy build. Normal Wavy Corrective actions: 1. Run Z and Offset calibrations. 2. Reprocess the part using the latest version of HP Designjet 3D Software Solution software and check STL report for errors. 3. Check for STL errors in CAD software. 4. Replace the tip shrouds. 5. Loose tips screws, tighten the screws. 6. Replace the tips. 7. Deformed toggle spring, replace the toggle spring. 8. Check X/Y guide rods for loose hardware. Replace XY table as needed. -150