Removing the right side panel: 1. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, remove the 3 mounting screws. See Figure 67. Figure 67: Right side panel mounting screw locations Remove the 3 right side panel mounting screws. 2. Slide towards the back of the printer and pull outward to remove. See Figure 68. Figure 68: Removing the right side panel Pull the right side panel out and towards the back of the printer to remove. Installing the side panels 1. Slide the left side panel towards the front of the printer and push into place. 2. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, Reinstall the 3 mounting screws. 3.
Slide the right side panel towards the front of the printer and push into place. 4. Using a 5 ⁄ 16 ” nut driver or standard screwdriver, Reinstall the 3 mounting screws. 5. Reinstall the top panel. See “Installing the top panel” on page 162 -164