Figure 233: Left side Y belt retaining clip mounting screw locations Remove the outer mounting screws Loosen, but do not remove the inner mounting screws 12. Using a 5 ⁄ 16 ” box wrench, remove the outer Y belt retaining clip mount- ing screws from the right side. See Figure 234. 13. Using a 5 ⁄ 16 ” box wrench, loosen, but do not remove, the inner Y belt retaining clip mounting screws from the right side. See Figure 234. 14. Pull the right side Y belt out from the retaining clip. Figure 234: Right side Y belt retaining clip mounting screw locations Remove the outer mounting screws Loosen, but do not remove the inner mounting screws 15.
Decrease the Y belt tension by turning the tensioning nut ( Figure 235. ). -274