HP — Performing part based calibration for HP Designjet Color 3D with the HP Designjet Diagnostics Software

Figure 380: Measuring diameter of circle F 17. Add the lengths derived from steps 14 and 15 (C-F and F-I) and then sub- tract the width of circle F derived from step 16. Record this total as “Right” 18. Measure and record the distance from the outside edges of circles A and D. See Figure 381 Figure 381: Measuring distances from outside edges of A and D 19. Measure and record the distance from the outside edges of circles D and G. See Figure 382 -374