HP — Printing your STL file:

Orientation Considerations: • Build Speed - Closely related to material use. A lesser amount of supports will allow for a faster build speed. Another factor affecting build speed is the axis orientation. The printer can build faster across the X-Y plane than it can along the Z axis. Orienting a part so that it is shorter within the modeling enve- lope will produce a quicker build. • Part Strength - A model is stronger within a layer than it is across layers. Depending upon what features you want your part to dem- onstrate, you may need to orient your part to have its greatest strength across a specific area.

For example a tab that needs to be pressed would be weakest if you are applying pressure across lay- ers. • Surface Finish - Much like orienting for strength, how the part is oriented will determine how the surface finish will look and allow the printer to provide the smoothest finish for a specific area. For example, if building a cylinder, orienting the cylinder upright will have a smoother surface finish than building it on its side. • STL File Repair - It is possible for an STL file to have errors while appearing to be trouble free. If the STL file contains errors, HP Designjet 3D Software Solution may have problems processing the file.

HP Designjet 3D Software Solution has the ability to automati- cally correct some STL file errors. How the part is oriented can impact this automated repair function. Adding your STL file to the pack: The Add to Pack button is found on the General, Orientation and Pack tabs. When you click on the Add to Pack button, HP Designjet 3D Software Solution will add the file that is currently in the preview window (General tab or Orientation tab) to the pack preview window (Pack tab). If the file in the preview window has not been processed for printing, processing will occur before the file is added to the pack.

Each additional click of the Add to Pack button will add another copy of the file to the pack. Printing your STL file: The Print button is found on the General, Orientation and Pack tabs. HP Designjet 3D Software Solution will now process all parts in the pack and create a CMB file from which the printer will print the parts. -42