Chapter 1: Introduction 1.3 Hornet 565 Robot User's Guide, 14608-000 Rev C Page 15 of 156 w Can I Get Help? Refer to the corporate website: http://www.ia.omron.com rporate Addresses ron Adept Technologies, Inc. 4550 Norris Canyon Road, Suite 150 San Ramon, CA 94583 USA 925 245-3400 ron Corporate Headquarters Shiokoji Horikawa, Shimogyo-ku, Kyoto 600-8530 Japan TEL: 81-75-344-7000 FAX: 81-75-344-7001 lated Manuals This manual covers the installation, operation, and maintenance of a Hornet 565 system. There are additional manuals that cover programming the system and adding optional com- ponents. See the following table.
These manuals are available on the software media shipped with each system. Table 1-2. Related Manuals Manual Title Description Robot Safety Guide Contains safety information for our robots. A printed copy of this guide ships with each robot. ACE User’s Guide Describes the installation and use of ACE. T20 Pendant User's Guide Describes the use of the optional T20 manual control pendant. SmartController EX User’s Guide Contains complete information on the installation and oper- ation of the optional SmartController EX and sDIO products. SmartVision MX User's Guide Instructions for use of the optional SmartVision MX indus- trial PC.
ePLC Connect 3 User’s Guide Describes the installation and use of the ePLC Connect 3 soft- ware, for using a user-supplied PLC as controller. IO Blox User’s Guide Describes the IO Blox product. Dual-Robot Configuration Procedure Contains cable diagrams and configuration procedures for a dual-robot system.