PERFORMANCE CHARACTERISTICS Table 1-2 lists the performance characteristics of the plotters. Table 1-2. Performance Characteristics Accuracy 0.38 mm (0.015 in.) or 0.2% of the specified vector length, whichever is greater at 23 C (73 F) at 50-60% RH, on HP film (monochrome mode only). Throughput D-sized loaded vertically: plain paper special paper special paper monochrome monochrome color Draft mode 1.8 min. 1.8 min. 3.4 min. Final mode 3.2 min. 2.7 min. 4.3 min. Enhanced mode 6.5 min. 6.5 min. 8.7 min.
Resolution Draft Mode 300 dpi addressable Final Mode 300 dpi addressable Enhanced Mode 300 dpi addressable (color) 600 dpi addressable (monochrome) Margins Leading and Trailing 17 mm ( 2mm) (normal plot area), 10 mm (expanded plot area) Sides 5 mm (normal or expanded plot area) Media Dimensions Sheet and Roll Maximum Widths D (A1)-size 619 mm (24 in.) E (A0)-size 917 mm (36 in.) Roll Maximum Media Length 150 feet (125 ft. for film) SERIAL NUMBER INFORMATION If the plotter serial number has a lower revision letter than the one shown on the title page, information in the Product History chapter, Chapter 9, will adapt this manual to that plotter. 1-6 Product Information