General Definitions of Safety Symbols International caution symbol (refer to manual): the product will be marked with this symbol when it is necessary for the user to refer to the instruction manual in order to protect against damage to the instrument. Indicates dangerous voltage (terminals fed from the interior by voltage exceeding 1000 volts must also be marked). Protective conductor terminal. For protection against electrical shock in case of a fault. Used with field wiring terminals to indi– cate the terminal which must be connected to ground before operating equipment. Low–noise or noiseless, clean ground (earth) terminal.
Used for a signal common, as well as providing protection against electrical shock in case of a fault. A terminal marked with this symbol must be connected to ground in the manner described in the installation (operating) manual, and before operating the equipment. Frame or chassis terminal. A connection to the frame (chassis) of the equipment which normally includes all exposed metal. Alternating current Direct current Alternating or direct current The WARNING sign denotes a hazard. It calls attention to a pro– cedure, practice, or the like, which, if not correctly performed or adhered to, could result in personal injury. The CAUTION sign denotes a hazard.
It calls attention to an op– erating procedure, practice, or the like, which if not correctly performed or adhered to, could result in damage to or destruction of part or all of the product. x Safety