Working With Media and Cartridge(s) Unloading Media To Adjust Drying Time You can make a global adjustment to the plotter’s automatic drying times through the front-panel menus. Device setup Drying time All menu modes Default: Normal If you are operating your plotter in an extremely dry environment, select Less in the front panel menu. In an extremely humid environment, select More . For environmental specifications, see page 11-4. IMPORTANT Adjusting drying times purely to speed up the plotter is not recommended as the quality of your plot can be impaired. MEDIA AND CARTRIDGES 3 3-23 Drying Time Selected in Front Panel Result None* The plotter cuts plot without delay.
Less Adjusted for the driest expected environmental conditions. Normal As described in the table on page 3-22 More Adjusted for the most humid expected environmental conditions. * Not recommended if you are using roll media and leaving the plotter unattended, as the ink may smear when the plots are dropped into the media bin.