Controlling the Page Format Page Size To Adjust the Page Size from the Front Panel Page format Size All menu modes Default: Software If you need to adjust the page size from the front panel, do so before sending the plot file from your computer , as the plotter determines the size of a plot at the time it is received from your application. 4-4 Size In Front Panel Comments Software The plotter looks to the plot you have sent for a page size instruction. If it is present the plotter uses this. If not, the plotted page size is the inked area plus margins. Inked area The plotted page size is the inked area plus margins. For a definition of “inked area”, see page 4-2.
ISO Best ISO A “Best ...” options The pl ot ter ch ooses the smal lest page si ze (from the A-series: A4, A3 etc.) that will hold the inked area of the plot. For example, if the inked area of the plot is between A3 and A4, the plotter chooses A3 as the page size. Discret e opt ions ISO A0/1/2/3/4 ANSI E/D/C/B/A JIS B1/2/3/4 ARCH E1/E/D/C/B/A Over A1/2 The plotted page size is exactly the size you specify. The largest discrete page size you can specify depends whether your plotter is an E-size or D-size model. ISO A0/1/2/3/4 ANSI Best ANSI ANSI E/D/C/B/A JIS Best JIS B JIS B1/2/3/4 ARCH Best ARCH ARCH E1/E/D/C/B/A Oversize (No “Best” option) Over A1/2