HP — HP DESIGNJET 700/750C PLUS PLOTTER - USER'S GUIDE, C4705-60021

Controlling a Plot’s Overall Appearance Changing Pen Widths and Colors Using the Plotter’s Internal Palettes To Change the Palette Settings Pen settings There are three palettes: Factory, Palette A and Palette B. You cannot change the Factory palette, but you can define Palettes A and B to be whatever you choose. Define palette Full menu mode Defaults: Palette: Factory Width: 0.35 mm Color: (see Palette Plot) 700 750C Plus 1 In the front-panel display, go to the Define Palette routine and choose Palette A . The steps below explain how to define Palette A. 2 Scroll to the pen number you want to change and press Enter .

3 The current width assigned to this pen is displayed, for example Width=0.35mm . If you want to change it, press Enter , scroll to the width you want and then press Enter again. If you wish to change the color for the pen scroll to Color. 750C Plus 4 The current color assigned to the pen is displayed, for example Color=110. If you want to change it, press Enter , scroll to the color you want and then press Enter again. 5 When both width and color are correct, press Previous . 6 Scroll to the next pen number you want to change, press Enter and do steps 3 through 5 again. 7 When all pen definitions are correct, press Previous until you have exited the menus. PLOT APPEARANCE 5 IMPORTANT.

The palette you have just defined will take effect only when you select it to be the current palette, as explained next. 5-5 Item Available Options Palettes Factory, A, B. Pens 0 through 15. Widths (mm) 0.13, 0.18, 0.25, 0.35, 0.50, 0.65, 0.70, 0.80, 0.90, 1.00, 1.40, 2.00, 3.00, 5.00, 8.00, 12.00. Note that 0.13 mm is a one-pixel line width and renders some colors as a dot pattern. Shades 0%, 10%, 20%, 30%, 40%, 50%, 60%, 70%, 80%, 90%, 100% Colors 0 through 255. As specified on the Palette Plot.