Controlling a Plot’s Overall Appearance Printing Color Drawings in Monochrome To Switch between Color and Monochrome Affects next plot sent 1 Use the front-panel key shown below to toggle between color and monochrome. Color Mono 750C Plus If you are using one of the software drivers supplied with the plotter, you can also make this setting (or an equivalent) within the driver. In this case, the driver setting will override the front-panel setting. The front-panel setting will, however, remain available as the default value, and the front-panel light displayed will not change.
If you use the supplied AutoCAD driver, you can force a color plot to monochrome by additionally setting the current palette to something other than Software (see page 5-6). 0027 2 Send the plot from your computer. The setting also impacts the plotter’s internal sample plots. 5-10