HP — HP DESIGNJET 700/750C PLUS PLOTTER - USER'S GUIDE, C4705-60021

Reconfiguring Your Plotter RECONFIG. 7 Changing the Graphics Language Setting for a Different Application Changing the Graphics Language Setting for a Different Application Your software application communicates with the plotter by a graphics language. The plotter supports HP industry standard CAD language HP-GL/2 (7856) HP-GL (7586B) HP RTL The plotter’s default setting is designed to work successfully with most applications, and is called 7586, HP-GL/2. However, it’s possible that with some older or less common applications, you may need to change this setting to HP-GL/2, as explained in the table below. To Change the Graphics Language Setting Device setup Lang Full menu mode Default:

7586, HP-GL/2 7-7 Graphics Language Comments 7586, HP-GL/2 This should work successfully for most software applications. With this graphics language setting another parameter is available: Terminator. Try changing this setting from Normal (the default) to Special:  if you are using an obsolete HP 7586 (pen plotter) driver, and your plots are incomplete. HP-GL/2 Try this setting:  if you have experienced plot position problems.  if you have experienced timing problems. However, if you choose this setting, you don’t have access to the Terminator option.