HP — HP DESIGNJET 700/750C PLUS PLOTTER - USER'S GUIDE, C4705-60021

Setting Up the Plotter Task 4: Load Media 5 Insert the spindle so that the large media stop (A) is to the right and the small end cap (B) to the left. Push in firmly on both ends. Be sure the media remains flush against the media stop. B SETUP 1 A A Media path 0017 The relationship of the media to the roller must be as shown in the diagram above. 1837 6 Check the leading edge as it unwinds from the spool. If it is uneven, trim it as explained in step 7. Otherwise go to step 8. 1-13