HP — HP DESIGNJET 700/750C PLUS PLOTTER - USER'S GUIDE, C4705-60021

Setting Up Your Plotter Task 5: Load the Print Cartridge(s) 2 For each cartridge in the set: b Remove the colored protective tape and tab from the cartridge’s nozzles. a Take the cartridge out of its box. 1754 For the 750C Plus, match the color of the cartridge’s label with the color of the dot above the stall. 750C Plus c Make sure that the plotter is still switched ON (Never install cartridges with the plotter switched OFF). d Insert the cartridge in the stall. Press down lightly and push the cartridge away from you until it snaps into place. If the front-panel display says Reseat cartridge(s) , then remove the cartridge and insert it again. Do so until the message disappears.

Yellow Cyan Magenta Black 2 1 0019 2 750C Plus 1 r004 700 1-22