HP — HP DESIGNJET 700/750C PLUS PLOTTER - USER'S GUIDE, C4705-60021

Setting Up the Plotter Extra Tips For UNIX Users Example 4: Configuring the Solaris 2.x Print Spooler for Sun SPARCstations In order to perform the following steps you must be a superuser or belong to the special sysadmin (GID=14) group. If you are using the NIS+ name service, you may need NIS+ permission to modify the printer table. Refer to your Sun documentation for details. 1 Create a directory for print spooling. All application users need read and write permission for this directory, so you must be a superuser to perform this step. For example, from the command line of a shell, type:

mkdir /usr/spool/cad chmod 777 /usr/spool/cad SETUP 1 2 Start the Administration Tool utility (from OpenWindows  ). 3 Load the Printer Manager window, and, from the Add Printer edit menu, select Add Local Printer . % /bin/admintool 4 In the Add Local Printer dialog box: For full details on how to use the Printer Manager option of admintool , consult your Sun documentation. 5 Exit admintool . 6 For serial connections: a Make sure the plotter’s baud rate is 9600 and parity is even. b From the command line of a shell, as superuser, enter the following: lpadmin –p pname –o ”stty=’9600 evenp –cstopb ixon ixoff’” where pname is the same as Printer Name in step 4.

It is assumed that /usr/sbin is in the superuser’s path. 1-43 Item Select Printer Name: For example, HP DesignJet 700 or HP DesignJet 750C Plus, depending on the plotter you have purchased Printer Type: Other, and set it to Unknown File Contents: Any Banner: Not required