Working With Media and Cartridge(s) Loading Media To Load a Sheet Which way round? You can load a sheet in either portrait or landscape orientation. Unless using the Rotate option (see page 4-7), load the sheet in the same orientation as you have specified in your software. or Which way up? As you load the sheet, it is the under side on which the plotter will print. With most media types, the two sides are different and so it is important to load the sheet correctly. Refer to the table below. 750C Plus 3-18 Media Type Media-Loading Tips Opaque bond Translucent bond Natural tracing paper Vellum Both sides are the same. If the sheet is curled, load with the curve (hollow) side towards you.
Coated paper Heavy coated paper Load with the coated side down. On HP Coated Paper and Heavyweight Coated Paper, look for the small notch in the corner: When loading in a portrait orientation, make sure the notch is on the right side of the leading edge. When loading in a landscape orientation, make sure the notch is on the left side of the leading edge. Matte film Load with the matte side down. Clear film Load with the rougher side down. High-gloss photo paper Semi-gloss photo paper High-gloss film Load with the glossy side down.