Removal and Installation Pinch-Wheel Cam Removal WARNING Switch off the Printer and remove the Power Cord. NOTE Refer to the table on Page 8-4 for information on screw types. 1. Remove Right Rear Cover - Refer to Page 8-16 . 2. Remove Left Rear Cover - Refer to Page 8-15 . 3. Remove the Deflectors - Refer to Page 8-119 . 4. Remove the Left Hand Cover - Refer to Page 8-6 . 5. Remove the Right Hand Cover - Refer to Page 8-10 . 6. Remove the Left Hand Trim - Refer to Page 8-22 . 7. Remove the Right Hand Trim - Refer to Page 8-20 . 8. Remove the Media Lever Assembly - Refer to Page 8-18 . 9. Remove the ISS - Refer to Page 8-64 . 10. Remove the Service Station - Refer to Page 8-69 . 11.
Remove the Vacuum Fan - Refer to Page 8-103 . 12. Remove the Electronics Module - Refer to Page 8-97 . 13. Remove the Booster Fan - Refer to Page 8-108 . 14. Remove the Media Sensor - Refer to Page 8-109 . 15. Remove the Entry Roller - Refer to Page 8-111 . 8-100 HP DesignJet 5000 and 5500 Series Printers Service Manual