Removal and Installation Vacuum Fan Removal WARNING Switch off the Printer and remove the Power Cord. NOTE Refer to the table on Page 8-4 for information on screw types. 1. Remove the Right Rear Cover - Refer to Page 8-16 . 2. Remove the Right Hand Cover - Refer to Page 8-10 . 3. Remove the Service Station Assembly - Refer to Page 8-69 . 4. Disconnect the Vacuum Fan Cable at position P19 on the Main PCA. P19 5. Remove the 4 T-20 screws ( Type L ) that secure the Vacuum Fan to the Sideplate. 8-103 HP DesignJet 5000 and 5500 Series Printers Service Manual