The internal part of the Touch Control Panel is the Home Screen and this is divided into three main areas: ● The upper area is for the Product Information (left icon) and for displaying high priority alerts (in text) you can press the most critical alert in the home screen and the others (less critical) will be shown. The main menu of the product is accessed by clicking on the Product Information icon and then selecting the last tab (at the right side) ● The middle area is used to place the three icons for the main work flows of the product, which are: Print, Scan and Copy. ● The lower area of the Home Screen is reserved for the contents area.
The contents area will contain all the functionality related with printing content, for example in the Job Queue. When a USB drive is inserted, a USB icon will also be displayed to the left of this area, and when a Postscript/PDF job is being printed an Adobe logo will display in the bottom right area Table 1-1 Service Key Combinations 2 Chapter 1 Troubleshooting ENWW Label Description Diagnostic mode 1. With the product turned off, press the Power Key 2. When the magic frame LEDs become active, select by touching one of the following sequences: ◦ CANCEL + HOME + HELP: hp-service-1 ◦ CANCEL + BACK + HELP:
hp-service-2 The LEDs in the frame will blink a response to confirm the selected sequence. Service menu (Service Engineers only) With the product is powered on, access main menu – service menu. Password is 3174 For tools that require another password, this is 5494 Service menu (for users) With the product powered on, access main menu – service menu. Password is 3174. There is an icon in front of the option, indicating that the tool is protected (which requires a service password).