Using the Touch Control Panel (MFP only) The external frame of the Touch Control Panel contains the following elements: ● The Home LED (top-left) is used to return to the Home Screen. When clicked only once, this same Home Screen is displayed. When pressed for more than 4 seconds, the Accessibility Home Screen is displayed. ● The Cancel LED (bottom right) is used to cancel any action, when it is active. ● The Back LED (bottom left) is to go back to the previous screen, when it is active. ● The Arrow LEDs (in the middle of each side) enables the user to navigate in both directions. ● The Eject LED (top-right) enables the user to stop the USB connection.
The internal part of the Touch Control Panel is the Home Screen and this is divided into three main areas: ● The upper area is for the Product Information (left icon) and for displaying high priority alerts (in text) you can press the most critical alert in the home screen and the others (less critical) will be shown. The main menu of the product is accessed by clicking on the Product Information icon and then selecting the last tab (at the right side) ● The middle area is used to place the three icons for the main work flows of the product, which are: Print, Scan and Copy. ● The lower area of the Home Screen is reserved for the contents area.
The contents area will contain all the functionality related with printing content, for example in the Job Queue. 2 Chapter 1 Troubleshooting ENWW