3-26 Troubleshooting and Diagnostics HP OmniBook 900 Internal Hard Disk Drive If boot security is enabled, sets whether a password is stored Disabled Lock on the hard disk. Secures data on the disk if the disk is moved to another computer. Removable Device Boot Sets whether the floppy drive or other removable device is a Enabled boot device. Power Menu Default If ACPI is activated in Windows 98, ACPI settings override settings in this menu. Power Management Mode Disables time-outs, selects a combination of time-outs, or Max Power allows customized time-outs. Savings Smart CPU Mode Enables automatic CPU power savings. Absence of keyboard, OB 900B:
On mouse, and hard disk activity could cause slower CPU OB 900†: Off response. For an OmniBook 900†, this should normally be off to avoid time sensitive operations—and this setting applies on both battery and ac power. Standby Time-out Sets the period of inactivity after which the computer goes 2 minutes from On to Standby power mode. Suspend Time-out Sets the period of inactivity after which the computer goes 4 minutes from Standby to Suspend power mode. (Skips Standby mode if that time-out is disabled.) Hibernate Time-out Sets whether the computer goes from Suspend to Hibernate 4 hours power mode after the indicated period of inactivity.
(Skips Suspend mode if that time-out is disabled.) Hard Disk Time-out Sets the period of hard disk inactivity after which the hard disk 2 minutes stops spinning. Also affects a hard disk drive in the plug-in module bay. Time-out on AC Sets whether power management time-outs occur while the ac Disabled adapter is connected. Power Button Mode Sets the action of the blue power button when pressed for less Suspend than 4 seconds. Lid Switch Mode Sets the action when the OmniBook lid closes. Turn Off LCD Resume on Serial Ring Sets whether the system resumes from Suspend if a ring Enabled signal is received.
Resume on Time of Day Sets whether the system resumes from Suspend at a defined Disabled time of day. Resume Time Sets the 24-hour time when the system resumes from Suspend if enabled. Auto Suspend on Undock Sets whether the OmniBook suspends after undocking. When Lid Closed Auto Turn-on on Dock Sets whether the OmniBook turns on after docking. Enabled Boot Menu Default Removable Device Shows the order of boot devices. Move the entries to 1. Removable Device Hard Drive change the order. 2. Hard drive CD-ROM/DVD Drive 3. CD-ROM/DVD drive Exit Menu Save Changes and Exit Saves Setup changes, exits, and reboots. Discard Changes and Exit Discards Setup changes since last save, exits, and reboots.
Does not affect Security and date/time changes. Get Default Values Restores default settings, stays in Setup. Does not affect Security and date/time settings. Load Previous Values Discards Setup changes since last save, stays in Setup. Does not affect Security and date/time changes. Save Changes Saves Setup changes, and stays in Setup. Security settings are saved when changed. † Models called 900† in this manual have no marking in the serial number, whereas models called 900B have 900 B after the serial number.