Hongqi — 空白页面

4.2. Driving Specifications Turn signal lamp control handle  Turn signal lamps can be operated when The engine switch is placed in "IG-ON" mode.  Turn signal light and danger warning light control 4 When the turn signal lamp is on, press the hazard warning lamp switch and the turn signal lamps on the left and right sides will flash at the same time. Press the hazard warning lamp switch again to return to the working state as the turn signal lamps. Driving When the hazard warning lights are on and the engine switch is placed in "IG-ON" mode, turn on the turn signal lights, then the turn signal is working and the hazard warning light stops working.

Turn off the turn signal lights and return to the working status of the hazard warning lights. 131 Right turn signal lamp Left turn signal lamp Comfort flicker When the control handle is toggled to the non-self-locking position once, the left/right turn signal lights will blink three times; when the control handle is continuously toggled to the non-self-locking position, the left/right turn lights will continue flashing until the control handle is released.