Hongqi — 空白页面

4.3. Operating lights and wipers  Operating conditions of front windshield wiper and washer The engine switch is in “IG-ON” mode and the engine compartment cover is closed.  Rain & lamp sensor The lamp & rain sensor identifies the amount of rain.  When the sprayer nozzle fails in spraying washer fluid Check if there is wash fluid in the windshield washer fluid tank. Check and confirm if the washer nozzle is not blocked.  If the front windshield wiper blade should be replaced ● If turning off the engine switch and switching the wiper control handle to MIST position within 10s, the wiper can be set to the service position.

● Set the wiper to maintenance position in the vehicle setting of audio system. (See P.227) ● When the wiper is in the service position, if operating the wiper control handle to a non-MIST position or close the wiper service position in the audio system settings, the wiper will exit from the service position. 142 Cleaning / wiping operation Pull back the wiper control lever for cleaning the front windshield.