Hongqi — 空白页面

4-5. Use other driving system Cancel Depress the brake pedal or push the cruise control handle forward to the "CANCEL" position and then release to cancel the cruise control. Restore To resume the cruise control and return to the set speed, push the cruise control handle up to the “RES+” position and release.  Noise of ACC automatic deceleration It is normal that noise will be generated when the ACC is applying automatic deceleration.  Headway 4 The default headway is “Distance 4”. Driving  Set conditions for cruise control ● ESC function is activated. ● All doors and the hood are closed. ● Driver wears the belt. ● The shift lever is in D. ● The brake pedal is not depressed by the driver.

● The camera of the advanced driver assistance system is not blocked and has no fault. ● The driving mode is not in snow mode or off-road mode.  Conditions for canceling cruise control ● The driver sets the ACC lever to CANCEL position to cancel the control. ● The driver depress down the pedal or press and hold the EPB button. ● Any door or engine compartment cover is opened. ● The driver unfastens the seat belt. ● The driver depresses the accelerator pedal for more than 1 min (minutes). ● The shift lever is switched to the position except D. ● ABS/TCS/ESC is activated. ● AEB/HDC/APA is activated. ● When the driving mode is switched among snow mode, off-road mode, and sand mode.

● System related function fault.  ACC system fault Have the FAW authorized Hongqi dealer check the vehicle if a fault has occurred. 153 Canceling and resuming ACC