7-3. Maintenance for user When the inspecting, removing, and replacing of the turbocharger is required, it must be performed after the engine is stopped and the turbocharger has cooled down. Do not drop any oil on the hot surface of the turbocharger, as this may cause a fire. Do not cool the turbocharger by pouring water on the hot surface of the turbocharger, as this may cause damage to the turbocharger. It is recommended to run at idle for 3 minutes after starting the turbocharged engine to ensure that the turbocharger is well lubricated. Brake fluid lid “MAX” (maximum) “MIN” (minimum) If the level is at or below the “MIN” mark, add the brake fluid to bring it up to the “MAX” mark.
320 Turbocharged engine The brake fluid