7-3. Do-It-Yourself Maintenance ■ If the key battery is low, the following conditions will occur Wireless remote control function failure. Effective range of action decreases. Smart entry is dysfunctional. Passive start function fails. ■ Use lithium battery It is suggested that same or equivalent products recommended by the China FAW authorized Hongqi distributor can be used for replacement. Battery model for the smart key: CR2032 7 Battery model for the card key: CR2016 Old batteries must be disposed of according to local regulations. Maintenance CAUTIONS ■ Replaced batteries and other parts away from the children. These parts are small.
However, if it is swallowed by a child inadvertently, it may cause suffocation. Caution ■ To ensure that the remote key works properly after replacing the battery To avoid accidents, the following precautions shall be observed. When operating, both hands shall be dry. Otherwise, the battery may be rust. Do not touch or move any other parts inside the remote control key. Do not bend the battery terminal. 335 Step Remove the used cell. Insert a new cell with its positive pole facing down. Replace the battery and battery compartment into the smart key.