Hongqi — 空白页面

8-2. Measures to Be Taken in Emergencies If the battery is low The following procedures may be used to start the engine if the vehicle's battery is discharged. Contact the FAW authorized Hongqi dealer or a qualified repair shop. If there is a set of jumper cables (or auxiliary cables) and another vehicle with a 12V battery with you, your engine can be jump started with the following steps. Step Remove the battery trim cover and open the positive cap. Step Connect the jumper cables Connect to the positive (+) battery terminal on your vehicle. Connect to the positive (+) battery terminal on the second vehicle. Connect to the negative (-) battery terminal on the second vehicle.

Connect to the negative (-) battery terminal on your vehicle. Start the engine of another vehicle. Increase the engine speed of the other vehicle slightly and keep it at about 5 minutes to recharge battery of your vehicle. Step Step Keep the engine of another vehicle running and switch the engine switch of your vehicle to "IG-ON" mode to start the engine. Once the vehicle engine is successfully started, remove the spanning cable in exactly the opposite order as it was connected. Step Once the vehicle is started, contact the FAW authorized Hongqi dealer as soon as possible. 366