Hongqi — 空白页面

3.2. Opening, Closing and Locking the Doors and Trunk Lid ■ Operate system correctly  Make sure to carry the key when operating the system. Do not get the key too close to the vehicle when operating the system from the outside of the vehicle.  Depending on the specific position of the key and how to hold it, the key signal may not be detected, causing the system to malfunction. ■ Safety features  With remote or smart unlocking, the vehicle can be automatically locked for a while if the door or trunk lid is not opened. ■ When parking vehicle for long time  To prevent the vehicle from being stolen, do not place the key too close to the vehicle.

 When the vehicle is not driven for a long period, it must be locked. Otherwise, the battery may be discharged. ■ If the passive entry & start system does not operate properly  Start the engine. (See P.365)  Lock and unlock doors: use the mechanical key. (See P.364) ■ Remarks of passive entry & start function  Under the following circumstances, the system may not start normally even if the key is within the effective range (sensing area). ▪ When locking or unlocking the door, the key is too close to the window or exterior door handle, too close to or too far from the ground.

 As long as smart or card key is within the effective range, anyone can lock or unlock the door, so please keep the key properly.  If there is a large amount of water splashed on the door handle (such as in car washing or heavy rain), smart entry may fail.  The door may not be locked under the following circumstances. • When the smart key or card key is still in the car, the door is locked with the intelligent locking function. ▪ Take the key out of the car and lock the door when the engine switch is not turned off. • When either door is not fully closed. • When the gear lever is not in the P position. 88