Hongqi — 空白页面

3.3. Adjusting the seat Seat memory* It can store the information of seats, steering wheel (for partial models), exterior mirrors and the key. Memory setting: after adjusting the position of the seat, the steering wheel and the exterior rearview mirror, press any memory key (for more than 3s (seconds)) for a long time, release the key after hearing the instrument prompt, and the position information and current key information will be memorized in the key. Call up the memory content: Press the memory button to make the seats, the steering wheel and the exterior mirrors automatically move to the stored positions in this button. Each key corresponds to three sets of memory positions.

■ Initialization setting Put the engine switch in "IG-ON" mode, and press keys 1 and 3 at the same time for initialization setting. After the alarm speaker sounds once, the initialization is successful. The greeting function consists of automatic back-off and return. Automatic return: Turn off the engine switch and open the left front door. The seat and the steering wheel will move backward automatically to the furthest position for the convenience of the driver. Automatic return: after the engine is switched on, the seat and steering wheel automatically return to the position before the automatic back-off. 96 Seat memory setting Seat greeting function