4-3..Operating.the.Lamps.and.Wipers Headlamp switch .When.the.headlamp.(dipped.beam). is turned on, push the lamp control handle forward to turn on the high beam; Pull the handle back to its original position to turn off the high beam. Pull backward the lamp control handle to turn on the high beam; releasing the lamp control handle to.turn.off.the.high.beam. 134 Front position lamp, rear position lamp, license plate lamp and instrument panel backlights.illuminate. Headlamps.(dipped.beam).and. all.the.above.lamps.illuminate. .Headlamps.(dipped.beam).and. position lamps and license plate lamp automatically turn on and off. Off. Note:.
when.the.switch.is.at.Auto,.if.headlamps,.position.lamps.and.license.plate. lamps.are.off,.the.daytime.running.lamps.will.turn.on. Tu rning on the high beam