Familiarising yourself with your appliance en 4.4 Touch displays Ў Heating line Once operation has started, the white line below the temperature turns red as the cooking compartment heats up. When you are preheating the appliance, the optimal time to place your food in the cooking compartment is as soon as the entire line has turned red. With set levels such as grill settings, the heating line turns red immediately. Ў Residual heat indicator When the appliance is switched off, the display ring shows the residual heat in the cooking compart- ment. As the residual heat dissipates, the display ring gets darker before eventually disappearing completely.
The touch displays act as both displays and controls. The touch displays are divided into several text fields. The text fields show you the current selection options and settings that have already been implemented. To select a function, press directly on the corresponding field. The selected function is marked with a red vertical bar on the side of the text field. The value for this is high- lighted in white in the Display → Page 7 . The small red arrow next to the text field shows you the function that you can scroll back to. 4.5 Control ring You can use the control ring to change the setting val- ues that are shown in the display and scroll in the touch displays.
When you reach the minimum or maximum value avail- able, this value remains in the display. If required, use the control ring to turn the value back again. 4.7 Cooking compartment The functions in the cooking compartment make your appliance easier to use. Shelf supports The rails in the cooking compartment enable you to place accessories at different heights. → "Accessories", Page 10 Your appliance has five shelf positions. The shelf posi- tions are numbered from bottom to top. You can remove the rails, e.g. for cleaning. → "Rails", Page 24 4.6 Display The display shows the current setting values on differ- ent levels.
Value in the foreground The value in the foreground is high- lighted in white. You can use the control ring to change the value directly. Once operation has started, the temper- ature or level is displayed in the fore- ground. Value in the background Values in the background are displayed in grey. To change the value using the control ring, select the required function in advance. Enlarge- ment As long as you use the control ring to change a value, only this value will be displayed as enlarged. Display ring The display ring is located around the outside of the display. Ў Position indicator If you change a value, the display ring shows you where you are in the selection list.
The display ring may be continuous or divided into segments de- pending on the settings area and the length of the selection list. Ў Progress indicator During operation, the display ring displays the pro- gress and turns red at second-long intervals. As the cooking time counts down, one segment of the display ring disappears every second. Self-cleaning surfaces The back panel in the cooking compartment is self- cleaning. The self-cleaning surfaces are coated with a porous, matte ceramic layer and have a coarse sur- face. When the appliance is in operation, the self-clean- ing surfaces absorb splashes from roasting or grilling and break them down.
If the self-cleaning surfaces no longer clean themselves adequately during operation, heat up the cooking com- partment specifically to the right temperature. → "Cleaning self-cleaning surfaces in the cooking com- partment", Page 22 Temperature display The heating line and the residual heat indicator show you the temperature in the cooking compartment. Due to thermal inertia, the temperature that is displayed may differ slightly from the actual temperature inside the cooking compartment. 7