Windows software EN Figure. 6 Upper computer user interface 1. Hardness value histogram After selecting a group of measured values to load, the specific value of a measured number is represented by a histogram. 2. Loading details The measured data, including material, impact angle, hardness scale, impact device, impact times, specific value, maximum value, minimum value, average value and test date, shall be displayed as a whole. 3. Connection status When the device connection is successful, "Device connected" is displayed. The previous time is the time when the device was connected. When the device is disconnected, "Device disconnected" is displayed.
The previous time is the time when the device was disconnected. 4. Control area Load: load the data of the above selected group. Save as CSV: Export the load group data, including material, impact angle, hardness scale, impact device, impact number, specific value, maximum value, minimum value, average value and test date, as a CSV file. Save as PDF: Export the histogram to a PDF file. Print Preview Print: Print the currently loaded group data. 5. Current date Copyright©Qingdao Hantek Electronics Co.,LTD HT360 series user manual 29