Attached table EN 8.4 Attached table 4 Copyright©Qingdao Hantek Electronics Co.,LTD HT360 series user manual 35 Ser Diagram of special- ial Code model remarks shaped support ring No Z10-15 Measure the external 1 03-03.7 cylindrical surface R10~R15 Z14.5-30 Measure the external 2 03-03.8 cylindrical surface R14.
5~R30 Z25-50 Measure the external 3 03-03.9 cylindrical surface R25~R50 HZ11-13 Measure the internal 4 03-03.10 cylindrical surface R11~R13 HZ12.5-17 Measure the internal 5 03-03.11 cylindrical surface R12.5~R17 HZ16.5-30 Measure the internal 6 03-03.12 cylindrical surface R16.5~R30 K10-15 Measure the external 7 03-03.13 spherical surface SR10~SR15 K14.5-30 Measure the external 8 03-03.14 spherical surface SR14.5~SR30 HK11-13 Measure the internal 9 03-03.15 spherical surface SR11~SR13 HK12.5-17 Measure the internal 10 03-03.16 spherical surface SR12.5~SR17 HK16.5-30 Measure the internal 11 03-03.17 spherical surface SR16.5~SR30 UN Measure the external 12 03-03.18 cylindrical surface, the radius is adjustable R10~∞