EN Function introduction 5 Function introduction 5.1 Measurement list The instrument will enter after startup. If you are on any other page, you can enter the page by pressing . The page mainly highlights the measurement results. At the same time, change the font color to display the current sorting results. When the measured temperature is above the upper limit or below the lower limit, the color of the temperature value on the page will turn red. The display page is shown as following: Figure 5.1 Measurement list 1 Number of channels 2 Temperature value 3 Type of thermocouple 5.2 Measurement bar chart After the instrument is started, enter . Then press the bar chart button to enter .
If you are on any other page, you can just press to enter the page. The page mainly highlights the proportion of the measurement results to the limit value. Copyright Qingdao Hantek Electronics Co., LTD HTM200 user manual 23