11 Keeping the shaft low, slide it toward the right until the left end (callout 2) releases. 12 Carefully pull the left end of the shaft toward you until it clears the left side of the chassis. 13 Pull the shaft to the left and out of the printer. 2 3 Figure 65. Removing the pickup roller shaft (2 of 2) To reinstall Be sure to align the clutch on the pickup roller shaft with the follower (large plastic tab) (callout 3) on the paper lift plate, so it is in the position shown in figure 64 on page 121. 122 Chapter 5 - Removal and replacement ENWW